|   My,
          (Dan's) basic method of preparing and smoking  an award winning
          Pork Ribs is as follows
 
    WHAT TYPE OF PORK RIBS
 One
        of the first things you need to do is decide what type of Pork Rib
        (spare or back) you want to use.  I personally prefer spare ribs
        myself.  I like them because it is what I started using and learned
        on, they seem meatier, they are cheaper, and are what I am accustomed
        to.  I have won many awards using spare ribs against competitors
        who have used back ribs.       SPARES VERSUS BACKS
 When
        I said I spare's are cheaper that does have a caveat.  I cook my
        spares St. Louis style.  In other words I cut the brisket bone off
        and the skirt.  After the spare is trimmed  it looks very much
        like a back rib but the bones are not as curved.  In fact, Bill
        Wight, who states he prefers backs better than spares, once was tasting
        my left-overs from a contest and said this was a VERY VERY good
        rib.  I said, but Bill, you are a "back" type guy! 
        He said, well these are backs.  I said no, these were St. Louis
        spares, he was incredulous and unbelieving..  The point is one can
        trim and cook a spare to look and taste exactly like a back rib. 
        But, back to the point of cost and expense on spares versus backs. 
        When you buy a back for typically $3.99 per pound you have no waste or
        trimmings to speak of.  When you buy a spare for $1.99 per pound
        you have the brisket bone and skirt meat as left-over trimmings if you
        cut St. Louis style, which I do.  These trimmings are great to cook
        while you are doing you spares.  They only take about 2 hours and
        are good pre-dinner snacks.  But, if you are doing 10 or 20 racks
        of spares the trimmings can be more trouble to cook than they are worth,
        take up valuable cooker shelf real-estate, and are not what the customer
        paid for.  Also, at a contest there is no time to deal with them so
        I just toss them.  There, I probably tossed the difference in price
        when I could have got backs instead and had no trimmings.  However,
        backs cook and taste differently, so I still buy spares.  So, take
        all the above into consideration when you decide what rib product you
        want to purchase and cook.     TRIMMING AND PREPARATION
 Reference
        to trimming I like, as I said previously, to use spares cut in the St.
        Louis Style.  This basically means that the brisket bone and skirt
        are removed.  But, my method is the following:    -
        Remove from package and immediately remove the membrane on the back side
        of the ribs.  This is easier to remove with the rib rack in an
        un-trimmed state versus trimmed for me.  I just use a sharp object
        (screwdriver, fork, knife, or whatever) and get under the membrane about
        the 3rd bone up from the large side, then get my finger under it, then
        grip it with a paper towel and try to remove it in one full piece. 
        That only happens about 1 out of 3 times.  The butcher usually has
        sliced the membrane somewhere along the line and it rips as a result.
        The premise of membrane removal is it will be chewy after cooking and won't
        allow seasoning penetration. Some say the down side is it allows
        moisture to leave the rib.  I still remove it.    -
        Remove any obvious and obnoxious fat. I don't get to anal about this
        however, so just do what pleases you.    -
        It is now time to cut off the brisket bone.  I simply lay the rack parallel
        to my cutting board (long ways) and then cut off the brisket
        side in a parallel, but same, distance from opposite end (about 6-7
        inches) throughout the entire rack.  Now you spares look like
        backs.  Trim the small end of the rack for a raggedy end if
        necessary.       -
        Cut off the skirt.  This is the small extending piece of meat, by
        about 1 - 2 inches, off the underside of the spare.      - There
        is always a fat cap on one end of the spares rack.  If that appears
        to need removal (as in a big, thick cap) I will do so.  If it seems
        more appropriate to leave it in place, I do so.      All
        meat trimming and preparations are complete     SEASONINGS
 Seasoning
        of either backs or spares at this point is a very simple and easy
        task.  I choose not to marinade my ribs.  I have never found a
        benefit that I felt was worth the effort.  That is not say there is
        not a great marinade that would make a ribs taste batter.  I just
        feel that proper preparation, seasonings, cooking , marinating, and
        glazing can produce a rib that could take 1st place in the state without
        a long marinating period.      So,
        bottom line is I just lay the ribs all out, meat side down.  Take
        mustard (just plain mustard) and LIGHTLY coat all the racks.  Then
        I take my 5 Star BBQbyDan Specialty Seasoning Rub and sprinkle all the racks
        LIGHTLY.  Turn them over and repeat the process.  In the end
        the ribs are meat side up and seasoned on both sides.  They are now
        ready to put into the Smoker.     COOKER, RACKS, WOODS
 If
        you have the cooking space just put them in the cooker meat side
        up.  If there are 20 - 30 racks, then put them in rib racks. 
        Just pick a nice spot that has even heating (about 235 - 245) and go for
        it.  I will typically cook ribs with 80% oak and 20% hickory. 
        Oak is easier to come by in California.  Hickory is harder. Neither
        is as easy, or cheap, as mesquite to come by. Oak is not as strong of a
        smoke flavoring.  Hickory is a stronger flavoring wood.  I do
        not use mesquite on ribs.  Ribs are the kind of meat that you are
        eating as much, or more, of the exposed meat during the cooking period
        time as what is not exposed.  This is the opposite of brisket or
        butt where most of the content of what you are eating was NOT exposed to
        the smoke.  So, for that reason I will cook my butts, briskets,
        tritips, and prime rib with mesquite.  But, will not cook ribs with
        mesquite, but, instead will use the oak / hickory mixture.  Why
        even mess with a less tasteful wood like mesquite one might ask. 
        Well, here in California they sell it in every store out there in 5 - 40
        pound bags VERY cheap.  Oak and Hickory is hard and expensive to
        come by.  Also, I actually like mesquite on my butt, brisket, and
        chicken, but NOT my ribs.  We are probably talking a 4 1/2 hour
        back and 5 1/2 hour spare cook-time.  I would rotate and baste them
        the first time at 2 hours.  Rotate them end-over-end,
        side-over-side (turn over), upper to lower shelf if applicable, and
        side-to-side (shelf positioning) if applicable.  Of course if you
        have a carousel smoker forget all the rotations.  So, that is the story.       COOKING, SPARES, BACKS
 There
        is a definite difference in the way the two types of pork ribs are
        cooked.  But, not that much different also.  Basically the
        back is a more delicate rib.  Only in terms of time.  A 
        spare with a lot of basting and with the final glaze might take 5 1/2 -
        6 hours at 225 - 245.  The back might take 4 1/2 - 5 hours at 225 -
        245.  Check for the "break" in the meat to ensure correct
        doneness.  That is when you can reach in and twist the 3rd or 4th
        bones in and have them break versus bend, you are there.      MARINATING
 There
        is lots of people that will marinate their pork ribs.  This is
        probably a good thing. I however do not for multiple reasons.  I
        instead take the approach that I want to open the package, trim, and
        season as close to the time that I put the meat on the smoker. 
        This is just a personal preference.  I also feel that my approach
        will provide you with the BEST ribs you have ever had.  Very much
        award winning.  I only items we get more awards and trophies for
        than my ribs would be chicken.  But, we do very well in both. 
        So, bottom line is I don't marinade, other do.  That is fine. 
        Try both  and then decide which method works best for you.      GLAZING
 Here
        in California glazing is almost mandatory.  We are a state of
        "sticky, sweet, and gooey" on our pork rib products. 
        Now, if you were in Texas or maybe Kansas City MO, it would be a
        different story.  You might not glaze, and if you did it might not
        be sticky and gooey.  Hey, sticky and gooey is fine with me. 
        While in California do as the Californians do!  Since most glazes
        (BBQ Sauces) have bunches of sugar I wait until the last 30 minutes to
        put my glaze on.  So, when the ribs break I pull them out, glaze,
        then put them back in for 30 minutes.  After that 30 minutes period
        they are done.     FINAL PRODUCT
 The
        final product is going to be the BEST ribs you have every had.  Whether
        you used backs or spares.  REMEMBER, moisture is the key to good
        ribs.  If prepared and cooked correctly, they will be moist. 
        If you follow the guidelines above your ribs will come out tasty, moist,
        and great.    Dan
        Cannon Coyote
        Road Kill, A Competition Cooking Team 
		BBQbyDan
        Specialty Q, A Fine Catering Company  |